Navigation

    VEYE IMAGING Forum
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc

    SOLVED CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功

    CS MIPI camera
    2
    35
    4437
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • 刚
      刚子 @veye_xumm last edited by

      @veye_xumm 2023-06-12-175402_591x634_scrot.png 重启后就是这个状态了

      veye_xumm 1 Reply Last reply Reply Quote 0
      • veye_xumm
        veye_xumm @刚子 last edited by

        @刚子 不好意思，刚才两个命令写错了

        dmesg | grep veye

        dmesg | grep 954
        刚 1 Reply Last reply Reply Quote 0
        • 刚
          刚子 @veye_xumm last edited by

          @veye_xumm lingchuang@raspberrypi:~ $ tail /boot/config.txt

          Run as fast as firmware / board allows

          arm_boost=1

          [all]
          gpu_mem=128
          dtparam=i2c_vc=on
          arm_64bit=0
          dtoverlay=ds90ub954
          gpu_mem=256
          #dtoverlay=veyecam2m
          lingchuang@raspberrypi:~ $ cat /etc//rc.local
          #!/bin/sh -e

          rc.local

          This script is executed at the end of each multiuser runlevel.

          Make sure that the script will "exit 0" on success or any other

          value on error.

          In order to enable or disable this script just change the execution

          bits.

          By default this script does nothing.

          Print the IP address

          _IP=$(hostname -I) || true
          if [ "$_IP" ]; then
          printf "My IP address is %s\n" "$_IP"
          fi
          sleep 1;sudo dtcoverlay veyecam2m
          exit 0
          lingchuang@raspberrypi:~ $ dmesg |grep veye
          lingchuang@raspberrypi:~ $ dmesg |grep 954
          [ 5.895480] systemd[1]: Listening on udev Control Socket.
          [ 11.120745] ds90ub954: loading out-of-tree module taints kernel.
          [ 11.122072] i2c-ds90ub954 10-0030: ds90ub954_probe: start
          [ 11.122091] i2c-ds90ub954 10-0030: ds90ub954_parse_dt: deserializer:
          [ 11.122116] i2c-ds90ub954 10-0030: pass-gpio not found, ignoring
          [ 11.122244] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: parsing serializers device tree:
          [ 11.122267] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found
          [ 11.122279] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0
          [ 11.122291] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found
          [ 11.122303] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0
          [ 11.122315] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found
          [ 11.122327] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0
          [ 11.122339] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found
          [ 11.122351] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0
          [ 11.122363] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio0-control property not found
          [ 11.122374] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000
          [ 11.122386] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio1-control property not found
          [ 11.122397] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000
          [ 11.122409] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio2-control property not found
          [ 11.122420] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000
          [ 11.122433] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio3-control property not found
          [ 11.122443] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000
          [ 11.122456] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - hs-clk-div property not found
          [ 11.122467] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4)
          [ 11.122480] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-m-val property not found
          [ 11.122491] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1
          [ 11.122503] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-n-val property not found
          [ 11.122514] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28
          [ 11.122653] i2c-ds90ub954 10-0030: ds90ub953_i2c_client init client done
          [ 11.122726] i2c-ds90ub954 10-0030: ds90ub953_regmap_init init regmap done
          [ 11.122805] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - virtual-channel-map property not found
          [ 11.122817] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - virtual-channel-map set to default val: 0xE4
          [ 11.122828] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: serializer 0 successfully parsed
          [ 11.122843] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: done
          [ 11.122854] i2c-ds90ub954 10-0030: ds90ub954_init starting
          [ 11.127312] i2c-ds90ub954 10-0030: ds90ub954_init: device ID: 0x60, code:_UB954, revision: 0x20
          [ 11.644062] i2c-ds90ub954 10-0030: ds90ub954_init: start init of serializer rx_port 0
          [ 12.614231] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=0 x 10ms
          [ 12.644197] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=1 x 10ms
          [ 12.674230] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=2 x 10ms
          [ 12.704210] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=3 x 10ms
          [ 12.734180] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=4 x 10ms
          [ 12.764177] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=5 x 10ms
          [ 12.794178] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=6 x 10ms
          [ 12.824204] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=7 x 10ms
          [ 12.864201] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=8 x 10ms
          [ 12.894663] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=9 x 10ms
          [ 12.924179] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=10 x 10ms
          [ 12.955602] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=11 x 10ms
          [ 12.994205] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=12 x 10ms
          [ 13.024258] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=13 x 10ms
          [ 13.054206] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=14 x 10ms
          [ 13.084297] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=15 x 10ms
          [ 13.114304] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=16 x 10ms
          [ 13.144178] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=17 x 10ms
          [ 13.174184] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=18 x 10ms
          [ 13.204235] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=19 x 10ms
          [ 13.234262] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=20 x 10ms
          [ 13.264236] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=21 x 10ms
          [ 13.294175] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=22 x 10ms
          [ 13.324189] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=23 x 10ms
          [ 13.354255] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=24 x 10ms
          [ 13.384248] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=25 x 10ms
          [ 13.414222] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=26 x 10ms
          [ 13.444192] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=27 x 10ms
          [ 13.474281] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=28 x 10ms
          [ 13.504223] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=29 x 10ms
          [ 13.534201] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=30 x 10ms
          [ 13.564190] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=31 x 10ms
          [ 13.599568] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=32 x 10ms
          [ 13.624208] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=33 x 10ms
          [ 13.664255] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=34 x 10ms
          [ 13.694247] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=35 x 10ms
          [ 13.724242] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=36 x 10ms
          [ 13.754211] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=37 x 10ms
          [ 13.784222] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=38 x 10ms
          [ 13.814211] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=39 x 10ms
          [ 13.844213] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=40 x 10ms
          [ 13.874203] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=41 x 10ms
          [ 13.904183] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=42 x 10ms
          [ 13.934173] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=43 x 10ms
          [ 13.964321] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=44 x 10ms
          [ 13.994200] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=45 x 10ms
          [ 14.024269] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=46 x 10ms
          [ 14.054195] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=47 x 10ms
          [ 14.084233] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=48 x 10ms
          [ 14.114172] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=49 x 10ms
          [ 14.114194] i2c-ds90ub954 10-0030: ds90ub954_init: Backchannel setup failed!
          [ 14.114205] i2c-ds90ub954 10-0030: ds90ub954_init: init deserializer rx_port 0 failed
          [ 14.114216] i2c-ds90ub954 10-0030: ds90ub954_init: deserializer rx_port 0 is deactivated
          [ 14.116756] i2c-ds90ub954 10-0030: ds90ub954_probe: init ds90ub954_done

          veye_xumm 1 Reply Last reply Reply Quote 0
          • veye_xumm
            veye_xumm @刚子 last edited by

            @刚子
            有两个问题。

            1. /etc//rc.local中增加的这行，关键字是dtoverlay，你多写了一个c。
              所以现在表现的是veyecam2m驱动并没有加载上，dmesg | grep veye指令没有任何打印信息。
            2. 系统初始化probe fpdlink的接收模块的时候，提示报错。应该是硬件连接的问题。
              请检查：
              2.1 是否供电正确？
              2.2 FFC 排线是否方向正确？
            刚 3 Replies Last reply Reply Quote 0
            • 刚
              刚子 @veye_xumm last edited by

              @veye_xumm 使用你们自带的异侧线，供电12V 直流，应该没问题，之前的方式已经连接成功。

              veye_xumm 1 Reply Last reply Reply Quote 0
              • 刚
                刚子 @veye_xumm last edited by

                @veye_xumm
                错误1 /etc//rc.local中增加的这行，关键字是dtoverlay，你多写了一个c。 已经修改
                显示如下
                lingchuang@raspberrypi:~ $ dmesg |grep veye
                [ 14.024096] veyecam2m 10-003b: probe failed
                lingchuang@raspberrypi:~ $

                1 Reply Last reply Reply Quote 0
                • 刚
                  刚子 @veye_xumm last edited by

                  @veye_xumm
                  连接方式
                  微信图片_20230613151639.png 微信图片_20230613151634.png 微信图片_20230613151627.png

                  veye_xumm 1 Reply Last reply Reply Quote 0
                  • veye_xumm
                    veye_xumm @刚子 last edited by

                    This post is deleted!
                    1 Reply Last reply Reply Quote 0
                    • veye_xumm
                      veye_xumm @刚子 last edited by

                      @刚子 e9f2956b-702d-4a17-8990-afb0a075847a-image.png
                      这个地方不要接。
                      5ce905f6-6933-4827-8cc3-f45976f5e9f0-image.png
                      同轴线插到J3。

                      另外，12V的电给到fpdlink的板子了吗?
                      不要带电插拔fpc线。

                      刚 1 Reply Last reply Reply Quote 0
                      • 刚
                        刚子 @veye_xumm last edited by 刚子

                        @veye_xumm 非常感谢，已经成功连接了，在树梅派上用VLC显示，感觉有1s的延时

                        veye_xumm 1 Reply Last reply Reply Quote 0
                        • veye_xumm
                          veye_xumm @刚子 last edited by

                          @刚子 不客气。 vlc本身的缓存比较大。你可以试试gstreamer，或者降低一下vlc的缓存。

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post