Topics created by joe

Hi @joe, @veye_xumm I have just encountered this issue, i.e., with a VEYE-MIPI-IMX462 camera on the Seeed J401 carrier board, flashed with Jetpack V6.2, except in this case with an Orin NX 8GB module.

It previously did work on exactly the same board (i.e., the /dev/video0 device was created) at Jetpack V6.1. Does that help explain anything?

Any ideas? (I need Jetpack V6.2 for PPP support, which was omitted from Jetpack V6.1).

Thanks
John

PS I found the Seeed reComputer J4011B with Jetpack 6.2 does not detect the Veye I2C address even though it is supplied with the "fixed" USB hub firmware (version 08B3). Very similar to the J401, but with an internal USB connection that is used for a mini-PCIe adapter "extension board" (perhaps this has upset the firmware fix).

@joe The RAW-MIPI-AR0234M is a MONO camera that has no color information and therefore does not support the UYVY data format. Please refer to this link below:
https://wiki.veye.cc/index.php/Mv_series_camera_appnotes_4_jetson#Configuring_global_variables

@joe The software part of the work seems fine. Next, we need to check if the hardware connections are correct, paying particular attention to the orientation of the FFC cable.

@joe yes