Topics created by nimadibaj

@nimadibaj

We are analyzing the output signal. It seems that between each video line, the CSI-2 output from your module enters Low-Power (LP) mode, which causes the video stream to continuously drop in and out. The module is completely new, and we have not sent any I²C commands to it. It appears that the module should operate in High-Speed (HS) mode, but it does not.

Before accessing these registers, write register 07 to 0xFE.

@veye_xumm
Thanks

@nimadibaj
0x3b
This camera has isp module, so you can't control the sensor directly. please refer to the following code.
http://wiki.veye.cc/index.php/VEYE-MIPI-290/327_i2c/
https://github.com/veyeimaging/raspberrypi/blob/master/i2c_cmd/bin/veye_mipi_i2c.sh